Underwater Load Shackles-LS01

Short Description:


Product Detail

Product Tags

Product Description

The Subsea Shackle is a High Strength Subsea rated Load Cell manufactured with a Stainless Steel Load Pin. The Subsea Shackle is designed for monitoring tensile loads below seawater and is pressure tested to 300 Bar. The load cell is manufactured to withstand a though environment. The electronics provide power supply regulation, reverse polarity and over voltage protection..
◎Ranges from 3 to 500 Ton;
◎Integrated 2-wire signal amplifier, 4-20mA;
◎Robust design in stainless steel;
◎Designed for Harsh Environments;
◎Designed to be compatible with existing standards;
◎Easy to install and maintain;
The electronics are molded and encapsulated inside the load cell, proven to be the best solution for EMC, potential leakage and long lifetime performance.

Applications

◎Subsea Cable recovery/repair;
◎Subsea vehicle lifting;
◎Wave generator mooring/tethering;
◎Subsea Cable Laying;
◎Offshore wind cable installations;
◎Bollard Pull and Certification;

Specifications

Capacity: 3t~500t
Safety Overload:  150% of rated load
Protection Class:  IP68
Bridge Impedance:  350ohm
Power Supply:  5-10V
Combined Error(Non-linearity+Hysteresis):  1 to 2%
Operating Temperature:  -25℃ to +80℃
Storage Temperature:  -55℃ to +125℃
Temperature Influence on zero:  ±0.02%K
Temperature Influence on Sensitivity:  ±0.02%K
Underwater Load Shackles

Dimension: (Unit:mm)

Cap. Max.Proof

Load(Ton)

Normal

Size'A'

Inside

Length'B'

Inside

Width'C'

Bolt Dia.

'D'

Unit Weight

(kg)

3 4.2 25 85 43 28 3
6 8 25 85 43 28 3
10 14 32 95 51 35 6
17 23 38 125 60 41 10
25 34 45 150 74 51 15
35 47 50 170 83 57 22
50 67 65 200 105 70 40
75 100 75 230 127 83 60
100 134 89 270 146 95 100
120 150 90 290 154 95 130
150 180 104 330 155 108 170
200 320 152 559 184 121 215
300 480 172 683 213 152 364
500 800 184 813 210 178 520

  • Previous:
  • Next:

  • Write your message here and send it to us